CÔNG TY TNHH - TM - DV KỸ THUẬT ĐIỆN NGUYÊN HÙNG

Chuyên phân phối thiết bị bơm từ các thương hiệu nổi tiếng

Email : [email protected]

  Hotline

0931 74 75 76

Motor chịu nhiệt 250oC - Chan đế

Lượt xem : 1021
Đánh giá sản phẩm :

Motor chịu nhiêt 

Công suất: 0.4Kw - 315Kw

Vòng quây: 2P, 4P, 6P, 8P, 10P 

Điện áp: 1Phase 220V, 3Phase 400V

Kiểu lắp: Chân đế - B3, Mặt bích - B5, Vừa chân đế vừa mặt bích : B35 

Nhiệt độ: 200ºC, 250 ºC , 300 ºC

 

 

Class Temperature (ºC) Duration
F250-120 250 ºC 2 hours
F300-120 300 ºC 2 hours
F400-120 400 ºC 2 hours
Item Standard Specifications
Type of Motor Totally Enclosed Air Over (TEAO) Squirrel Cage Cast Iron Induction Motor
Design Standard IEC 60034-1; EN 12101-3
Framesize 80-400
Voltage and Frequency Standard stock available are:

220-240/380-415V/50Hz for 2.2 KW & below

380-415/660-720V/50Hz for 3KW & above

Other voltages & frequency such as 200V, 346V, 440V & 60Hz can be supplied on request

Power Conditions ± 5% of rated voltage; ± 1% frequency and ± 1% phase unbalance
Efficiency Standard IE1 / IE2 / IE3 (IEC 60034-30-1)
Time Duty Continuous S1 or (S2 – (250°C or 300°C or 400°C/2hours – once only)
Cooling Method Fan application motors without a cooling fan, cooled by the airstream of the driven machine  (IC 418)
Method of Starting Full voltage direct on line starting or star-delta starting
Insulation & Temperate Rise Class Class H insulation and Class B temperature rise
Degree of Protection IP55
Rotor Winding Squirrel cage, aluminium conductor with end-ring and wafter blades integrally cast
Environmental Conditions Place: Non-hazardous, shaded

Ambient temperature: -20°C to 40°C

Relative humidity: Less than 90% relative humidity (non-condensation)

Altitude: Up to 1,000 metres above sea level

Direction of Rotation Standard motors are suitable for operation in either direction of rotation of shaft.

Direction of rotation can be reversed by interchanging any two of the power lines.

Test Procedure IEC and full voltage measuring starting operation
Fan Cover Pressed steel
Shaft Carbon Steel, round shaft with key
Bearing Grease pre-packed shielded ball bearing
Lubrication Heat resistant grease
Painting Phenolic rust-proof base plus lacquer surface finish. Painting in ATT red.
Ground Terminal NE set inside the terminal box
Terminal Box & Lead Wires Supplied with separate terminal box and 1 metre extended lead wires
Other Options Available (Contact ATT to inquire for other options)
VSD Driven Inverter duty motor suitable for VSD operation
Heaters Space heaters (110V/220V/1ph) or winding heaters available on request
Thermal Protection PTC thermistor 150°CWinding or bearing RTD (PT100)
Degree of Protection Up to IP66
Giá:
Liên hệ
 
 

Thông tin công ty

CÔNG TY TNHH - TM - DV KỸ THUẬT ĐIỆN NGUYÊN HÙNG

Mã số thuế: 0303838256 - Cấp ngày: 23/10/2006 - Cấp bởi: SỞ KẾ HOẠCH VÀ ĐẦU TƯ TPHCM
Địa chỉ : C4A/3A/2A Ấp 3A, Xã Vĩnh Lộc B, Bình Chánh
Cửu hàng : 340 Quốc Lộ 1A, P. Bình Hưng Hòa B, Q. Bình Tân , TP.HCM
Hotline : 0931. 74 75 76  
             0988 99 77 86 
             0917 206 459
Tiếp nhận phản ánh chất lượng hàng hóa: 0931. 74 75 76  

Bản đồ